Replacement Parts top

Home

 To Easel Online Catalog Pages

Sometimes bad things happen to good easels. If yours are 'out-of-warranty' they can be fixed easily—at low cost with the repair and replacement parts listed below. If you do not see the part you need or, otherwise need assistance, please contact us. See also warranty statements .

Scale varies in photos.

Looks Like This

 Net
Price

Order
No.

Description

$7.95

BNFSK1 

New 2011 Bullnose FloorStop  Non-marring, super-stop, poly-resin, floor grip inserts for the tripod bases of our easels.  Packet of three replaces worn or malfunctioning or missing glides of any easel we've ever made.

 

$4.95

EBRK1

Easel Bolt Replacement Kit  Four bolts with matching nuts, lock washers; includes assembly wrench (not shown) 1 lb ship wt.; These are the only bolts are required to hold the easel together. They have square necks and fit all easels made after January 1, 1985. Contact us if your easels are missing bolts and you are in doubt as to when they were made.

 

$9.95

BCRK1

Brace Clamp Repair Kit consists of fluted knob, closure cap, washers, spacers, bolt, nut, square-U-clamp and instructions necessary to make field repairs on clamping mechanism for rear brace (holds angle of post in position). Installer must provide and  be able to use a hacksaw to cut bolt on old, non-working part. 1 lb ship wt.

$26.95

SHMP6

Sliding Holders Matched Pair (Top and Bottom, both)  Sliding holders Matched pair, complete; includes top & bottom holder. 6 lbs ship wt.

 $13.95

SHTP3 

Sliding Holder Top Only, Note upward orientation of 'V' grippers when fluted knob is on right side, as shown; 3 lbs ship wt.

 $13.95

SHBM3 

Sliding Holder Bottom Only, Note downward orientation of 'V' grippers when fluted knob is on right side, as shown; 3 lbs ship wt.

$7.95 

SHRK1

Sliding Holder Repair Kit: consists of fluted knob, closure cap, washers, spacers, bolt, nut and instructions necessary to make field repairs on clamping mechanism for top or bottom sliding holder. Please note this kit can be used for field repairs on easels manufactured after January 1, 1996. Installer must provide and  be able to use a hacksaw to cut bolt on old, non-working part. Wt: 1 lb ship wt.; Contact us if you are in doubt as to when your easels were made.

$9.95

SHRRR

Sliding Holder Repair/Replace Recycle:  Regardless of the age of your non-functioning James Howard Co. sliding holders, contact us about sending them back to the factory for recycling (repair or replacement, our option). A single, flat rate per holder will apply. Price includes return shipping charges to your school. Holder returned to you comes with five (5) year warranty. This is a really good deal.

 

Prices fob factory; subject to authentication. Contact Us for shipping charges.

[ Top of Page ]